October 24 1999 Big Bertha Launch Report

This is the second flight of my Big Bertha cluster rocket.


Liftoff!

Coming down on parachute.


Comments

Post a Comment

Popular posts from this blog

Looking back on 2024

Image
Well, it's been an exciting year.  In addition to becoming a grandfather and going to half-time at work, I started the year learning to use my new 3D printe r .  I've used the printer to build rockets that are no longer available, learned how to combine my OpenRocket skills to 3D print novel or experimental rockets as well as printing things for my wife's gardening hobby, printing things inspired by her love of the Grateful Dead and printing things for my daughters.  For Halloween, some of our neighbors had rats (we think it's caused by the construction of Northwestern's new football/concert stadium) so we were asked by our Village not to put out real pumpkins.  As a solution, I 3D printed a Grateful Dead-themed Halloween pumpkin: I'm currently printing a (late) Grateful Dead-themed Christmas present for my wife.  This is my first four color 3D print, based upon what I learned printing multicolor coasters for Valentine's Day for my wife.  This involves pri...
Read more

3D printing a rocket no longer produced using OpenRocket

Image
Well, I finally decided to try merging my software skills with my new toy to try to recreate an out-of-production rocket, the 37 inch tall Estes Maxi Brute Honest John  (available 1975-1983; on page 31 of the Estes catalog at  https://cdn.shopify.com/s/files/1/0686/0220/0369/files/Estes_1975_Catalog.pdf ).  The nose cone is unique and no longer available, so I decided to try to take advantage of a new feature in OpenRocket version 23.09 that allows the export of parts of a rocket as an .OBJ file, suitable for 3D printing.  The OpenRocket team put together a great tutorial describing the process.   Luckily for me, someone posted a RockSim file for the Maxi Brute Honest John on RocketReviews.com in 2010, and OpenRocket supports the import of RockSim .rkt files so I thought I'd give it a try. OpenRocket displays the nose cone in two parts, a cone and a "transition" that inserts into the body tube.  Selecting each part in the OpenRocket design then choosing F...
Read more

New Year, New Toys

Image
Santa was very good to me this year!  I'd given my family a bunch of suggestions to pass on to "Santa" and I ended up getting several of the bigger items.  Among the rocket themed gifts I got this year were a Featherweight GPS Tracker and an Anycubic Kobra Max 3D printer .  I set up the printer in my office: It's big, 17.7" high x 15.7" wide x 15.7" deep, which will allow me to print tall rocket parts (nose cones, etc.).  It took a couple hours to set up, partly because I put the tower on backwards.  After printing the owl test print, I've built a bunch of things so far: - Owl (test print) - Grateful Dead cookie cutter bear - "Whirl & Hurl" spinner flying rocket - Tube cutting guides - Higher resolution Gemini capsule  than the one I got from the library - Bomb rocket parts - Featherweight GPS holder - Dummy Mercury capsule (so the fragile escape tower doesn't break) -  Bulbasaur Planter   Owl test print finishing 12/30 (2 hours...
Read more