October 25 1999 Launch Report

Today we launched the X-15, the Space Shuttle, and Sarah's Fat Boy.

X-15 ready to launch

Space Shuttle on the pad

Liftoff

Sarah's Fat Boy launch

Comments

Post a Comment

Popular posts from this blog

Looking back on 2024

Image
Well, it's been an exciting year.  In addition to becoming a grandfather and going to half-time at work, I started the year learning to use my new 3D printe r .  I've used the printer to build rockets that are no longer available, learned how to combine my OpenRocket skills to 3D print novel or experimental rockets as well as printing things for my wife's gardening hobby, printing things inspired by her love of the Grateful Dead and printing things for my daughters.  For Halloween, some of our neighbors had rats (we think it's caused by the construction of Northwestern's new football/concert stadium) so we were asked by our Village not to put out real pumpkins.  As a solution, I 3D printed a Grateful Dead-themed Halloween pumpkin: I'm currently printing a (late) Grateful Dead-themed Christmas present for my wife.  This is my first four color 3D print, based upon what I learned printing multicolor coasters for Valentine's Day for my wife.  This involves pri...
Read more

Cloning and enhancing another classic - Space Shuttle with boosters

Image
OpenRocket simulation of my boosted Space Shuttle in flight Back when I was a BAR99 (born-again rocketeer in 1999) I built and launched an Estes #1284 Space Shuttle  in October 1999.  It was a complicated kit, with 54 steps.  The final rocket flew on a C6-3 to about 200 feet then the shuttle separated and sort of glided back to the ground, with the main rocket recovered with its own 18" parachute.  I flew it successfully a couple times and is still on my shelf.  Estes sold this kit from 1976 to 1998, and it's occasionally available now for exorbitant fees on eBay and elsewhere. I've been intrigued by something Apogee Components released a couple of years back that allows us to attach booster rockets to a main rocket that will fall away after from the main rocket after their booster engines are exhausted.  The original Estes Space Shuttle used the "boosters", which were glued on, to hold stabilizing fins that could be removed for display but provided noth...
Read more

New Year, New Toys

Image
Santa was very good to me this year!  I'd given my family a bunch of suggestions to pass on to "Santa" and I ended up getting several of the bigger items.  Among the rocket themed gifts I got this year were a Featherweight GPS Tracker and an Anycubic Kobra Max 3D printer .  I set up the printer in my office: It's big, 17.7" high x 15.7" wide x 15.7" deep, which will allow me to print tall rocket parts (nose cones, etc.).  It took a couple hours to set up, partly because I put the tower on backwards.  After printing the owl test print, I've built a bunch of things so far: - Owl (test print) - Grateful Dead cookie cutter bear - "Whirl & Hurl" spinner flying rocket - Tube cutting guides - Higher resolution Gemini capsule  than the one I got from the library - Bomb rocket parts - Featherweight GPS holder - Dummy Mercury capsule (so the fragile escape tower doesn't break) -  Bulbasaur Planter   Owl test print finishing 12/30 (2 hours...
Read more